Skip to main content

Selecting a label by name

Goal: the PLC decides which label the printer prints, for example from the recipe of the current production order.

Printer setup​

Add a register mapping:

FieldValue
Address20
MappingSelect label
Data typeSTRING
Length16, room for names up to 32 bytes
PrinterNoLabel

Optional settings, see Print job fields:

  • Prefix and Suffix let the PLC send a short code instead of the full name. With prefix Order-, writing 1234 selects the label Order-1234.
  • Limit number of prints prints a fixed number of copies of each job.
  • Queue label adds the job to the queue, so the PLC can send the next job while the current one is printing.
  • Use a snapshot of the label freezes counters and the date and time when the job is selected, so the print matches what the PLC sent at that moment.

If the label names are numbers, a UINT16 or UINT32 item works too. The PLC then writes the number, and the printer uses its decimal text.

PLC​

When a new label is needed, write its name to registers 20–35 with function 16, once. Every write selects a job, even if the name is the same, so do not put the item in a cyclic write.

Check the response: exception 04 means the label does not exist on the printer, or the printer is not available. To confirm the job is selected, read the signal printer.NoLabel.label_selected, coil 2 in the example.

Try it​

from common import *

check(client.write_registers(20, to_string("Carton", 16)))
print(check(client.read_coils(2, count=1)).bits[0]) # label selected

response = client.write_registers(20, to_string("NoSuchLabel", 16))
print(response.exception_code) # 4